OP Clock Combi Chrono

- Stainless steel housing.
- Matt white dial face.
- Black hour and minute hands, red second hand.
- Polycarbonate front.
- Red LEDs.
- Built-in dimmer.

Digital clocks Stand-alone Analogue clocks Hospital Impulse Timecode NTP Operating room clock

General
Combined digital and analogue indoor clock designed for use in operating rooms. The clock has a polished stainless-steel housing and polycarbonate front.
The digital clock has an automatic built-in dimmer.

Display mode can be programmed to switch between time, date and temperature. (To display air temperature, a sensor is required – purchased separately.)

The digital clock can also be used as a chronometer (option).

Synchronization
The clock is also available as Impulse, Timecode, NTP or as Stand-alone.

Installation
Single-sided for surface or recessed mounting.

Power failure
The LEDs are extinguished during power failures. An internal clock keeps time for approx 48 hours. When power is restored, the LEDs light up displaying the correct time.

Character height
50/35 mm

	Impulse	Timecode	NTP	Stand-alone
Second hand:	Sweep	Sweep	Sweep	Sweep
Automatic summer/winter time:	Yes (via master clock)	Yes (via master clock)	Yes (via time server)	Yes
Power supply:	230 VAC	230 VAC	PoE	230 VAC
Power reserve:	48 hours	48 hours	48 hours	48 hours
Power consumption:			2 watt (IEEE 802.3af)
Ambient temp:	0 to +40°C	0 to +40°C	0 to +40°C	0 to +40°C
Protection class:	IP54 equivalent	IP54 equivalent	IP54 equivalent	IP54 equivalent